Recruiter

Hays TCE Jobs

Salary

From £20,000 to £25,000 per year

Location

Havant

Job term

Permanent

Job hours

Full time

A highly respected Hampshire employer within the engineering sector is looking for a professionally trained Test Engineer. The job is primarily testing electrical and electronic equipment before shipment to customers. There will be a minor element of mechanical or electro-mechanical testing involved as well.

Due to recent growth in the business, the company now requires a dedicated specialist Test Engineer to ensure quality control for a various range of electrical and electronic products assembled or built on site. These products will then be shipped with a quality guarantee to customers in the home and foreign markets. The products are highly varied and some have a degree of mechanical, hydraulic or pneumatic elements to them.

As a candidate for this job you will be professionally trained, preferably to Foundation Degree / HNC / HND level. A BSc or BEng in a relevant subject would be useful but not mandatory. You will have begun, or be seeking, a career in electrical or electronic engineering but may also have some experience in mechanical or electro-mechanical engineering too. You may have experience in testing various such systems, using a variety of fixed and hand-held test equipment.

If you are looking to launch your career in electrical/electronic engineering or take it to the next step, then apply now or call to find out more.
Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Recruiter

Manpower

Salary

Competitive

Location

Eastleigh

Job term

Permanent

Job hours

Full time

Working for our established client at their EMC lab in Eastleigh, where they test equipment to all worldwide standards, they have expanded to encompass worldwide approvals, including USA, the Far East and central Europe as well as Military EMC testing. They are looking for a EMC and/or R&TTE Test Engineer to join their team due to expansion. As a EMC Radio approvals engineer you will perform a wide range of testing both in-house and on-site. As part of small dedicated team the role involves a considerable amount of customer contact as well as technical expertise. Proven background with written test plans, test reports, technical justification documents. Performed testing to numerous EMC, RF and environmental standards. FCC certificate desirable.

You must be from EMC environment and able to resolve test issues and advise on standards interpretations. Familiar with EMC testing techniques is essential and radio approvals is beneficial as well as some of the following; R&TTE, The Radio and Telecommunications Terminal Equipment Directive requirements for wide range of radio products.

As outlined above.

Recruiter

Terry Parris Associates

Salary

From £40,000 to £45,000 per year

Location

Hampshire

Job term

Permanent

Job hours

Full time

Our client requires a Senior Mechanical Design Engineer to:
• Undertake the design, development and documentation of the Mechanical Engineering aspects of new products to achieve the required performance and cost parameters within the agreed project timeframes
• Provide technical support to the mechanical design and development engineers
• Provide support and development for existing products

KEY TASKS AND RESPONSIBILITIES
• Taking a leading role and being responsible for the mechanical concept development phase of new products and follow-on design and development activities as assigned by and agreed with the Engineering Manager
• Assist the Engineering Manager in the development of mechanical concepts, plans, specifications, technical expertise and ideas for new products that may in time become approved projects for the engineering teams
• To generate 3D/2D CAD models & files and the necessary manufacturing drawings, artworks, process specifications and project documentation and their authorised release in accordance with the company procedures
• To maintain the Engineering Dept. mechanical CAD and related systems
• To perform a project and people leadership role as and when required to ensure assigned activities are completed thoroughly and on time
• To design and develop mechanical systems and assemblies in support of new and existing products
• To evaluate and test those parts, products and assemblies within your control
• To undertake legislative product approvals testing and to compile any required reports/application documentation and to liase with Approvals Agencies as required to achieve product compliance
• Identify new technology and processes to enhance future and current products and to increase product profitability
• Exercise Design Authority judgement over those aspects of mechanical design and/or manufacturing concessions within your control in the best interest of the company and the customer
• To investigate manufacturing/production problems and to implement remedial measures as appropriate
• To liase with relevant staff throughout the company as and when required.
• To liase with suppliers to resolve problems and ensure the timely and correct introduction of new designs and processes
• To implement Drawing Change Notes as and when necessary to support the introduction of new products and the maintenance of existing products
• To monitor, control and report technical progress and costs on those tasks and work packages within your control
• To compile and maintain Project Documentation files and records to the defined company standards
• To produce reports, papers, specifications, handbook drafts and other documentation as necessary to support the above activities

You will need:
• Degree or HNC/HND in Mechanical Industrial Design
• Knowledge of plastics/sheet metal/castings type environment
• Creative & aesthetic design work as well functional mechanical solutions
• Experience of graphics and artwork generations
• Design life-cycle (concept to production) within an ISO 9001/9100 or similar quality environment
• High and Low volume design for Commercial and Leisure markets

Full UK Drivers Licence Required

To apply please go through the link and we will call you to discuss the role before your details are submitted.

Terry Parris Associates are recruitment consultants whom value the needs of their clients and candidates. We are always happy to discuss vacancies, so if you are interested in this or any other position we have please give us a call.

Recruiter

G2 Recruitment Solutions

Salary

Competitive

Location

Hampshire

Job term

Contract

Job hours

Full time

Position: Senior Mechanical Design Engineer

Duration: 3 months

Location: South England

Start: Immediate

My client is looking for a Senior Mechanical Design Engineer.

Must be experienced in checking design caculations.

Experienced in design of hydraulics and pumping systems.

Skilled in autocad and production of P&IDs.

A water backgroud and mechanical qualification is required.

If interested please send your CV or get in touch.

Recruiter

Recruitment21

Salary

Competitive

Location

Hampshire

Job term

Permanent

Job hours

Full time

Technician – Mechanical Engineering
£14,737.00 to £16,045.00 per annum

The STEM Academy at BCoT is looking to recruit an experienced mechanical engineer to work as a workshop technician in their mechanical engineering workshop.

The successful candidate will have a minimum of 5 years of industry experience of working with mechanical mills, lathes and turns and preferably be proficient at routine fault finding, maintenance and repair of these machines. You will also be expected to prepare materials for mechanical engineering classes which operate at the college.

We would love to hear from you if you are a flexible, highly motivated individual who wants to join a dynamic engineering team supporting learners to develop their engineering skills.

About the College

BCoT is a general Further Education College with a strong technical bias located in Basingstoke, whose vision is ‘to inspire every learner to succeed and excel’. At BCoT every learner will succeed. This is our guiding principle, and it’s the starting point for everything we do. We have a value added score in the top 25% of FE institutions in the UK, and ensure the achievement of our students by delivering high quality teaching in an inspiring and supportive environment.

None of this would be possible without our staff. We employ subject specialists who are passionate about delivering inspirational learning. Our teams have a true commitment to maximising the potential of every learner, and building a culture of mutual achievement in an atmosphere of respect. We know that BCoT is an inspirational place where learning can transform lives, and think of ourselves as launch-pad for a huge range of careers successes.

BCoT is committed to safeguarding and promoting the welfare of all its learners, and expects all staff to share this commitment. The successful applicant will be required to undertake appropriate checks as well as providing proof of right to work in the UK.

BCoT is an equal opportunities employer and welcome enquiries from everyone and value diversity in their workforce.

Main duties:

• Act as technician support for teaching staff including demonstration where necessary. Prepare materials for staff in advance of set work.
• Provide technical assistance in connection with students work as directed by lecturing staff.
• Supervise workshop provision for engineering students.
• Develop and operate a recording and booking system for equipment and materials and be responsible for both stock control and security of these items.
• Be responsible for the effective, clean and safe daily operational function of studios, equipment and material, their maintenance and security adhering to health and safety legislation at all times.
• Maintain an inventory for equipment in accordance with financial procedures and regulations.
• Receive and check all deliveries for Engineering equipment, store and distribute appropriately.
• Ensure the safe operation and maintenance of workshop equipment.
• Liaise with other staff to assist with the implementation of departmental systems and initiatives. Take part in staff development and the ongoing updating of technical skills.
• Assist staff and students working in the Engineering Department in the practical display aspects of exhibitions and those assessments requiring exhibitions.
• Run taster days/workshops with external parties. Liaise with staff to assist with the implementation of school systems and activities.
• To be the department Health & Safety rep (training will be provided).
• Take part in staff development and performance management setting own targets and keeping BlueSky up-to-date

For a comprehensive list of duties, please refer to the College job description.

Essential criteria:

• GCSE grade A*-C in English and Maths or equivalent
• Working within an Manufacturing or Mechanical Engineering environment
• Technical knowledge of an Engineering Workshop. Including Mills, Turns and Lathes
• Ability to prepare equipment and/or materials for use in an Engineering workshop, meeting industry needs
• Awareness of Health & Safety issues
• Excellent organisational skills
• Two-Way Communication
• Team working
• Student/Customer Focused
• Innovation and Problem Solving
• Well organized and proactive
• Calm and confident
• Ability to demonstrate self-motivation and to motivate others

Desirable criteria:

• Degree or equivalent vocationally relevant qualification.
• DTLLS (or working towards)

Closing date: 27th May 2013

To apply, please follow the job board application instructions. You will then be sent a web link to an online application form. Please note that this College does NOT accept CV’s alone.