Recruiter

Hays TCE Jobs

Salary

Competitive

Location

Crewe

Job term

Permanent

Job hours

Full time

As a Project Engineer you are responsible for undertaking engineering design, calculation and preparation of descriptive drawings for standard and systems products.

Utilising your engineering and design knowledge you will also carry out specialist projects with regard to customer specific / unusual requirements.

You will manage projects for the supply of vacuum pumps and systems and prepare and/or amend bills of materials for standard and project-based products.

Prepare engineering design and descriptive drawings using 2D AutoCAD and 3D Solidworks packages, technical data or performance charts for standard and systems products.

You will need a Degree in mechanical or similar engineering discipline and experience of 3D CAD, (Ideally Solidworks, but not essential).

There are 2 permanent positions available.

Good project management skills and experience of mechanical, metal, rotational equipment (experience of cast materials is highly desirable).
Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Recruiter

G2 Recruitment Solutions

Salary

Competitive

Location

Cheshire

Job term

Contract

Job hours

Full time

I am urgently looking for an electrical design engineer for a 6 month contract based in the North West of England.



The role will be working for a leading chemical company in the area and will be working on Electrical Design for chemical plants. The position requires an experienced Electrical Design Engineer who can start immediately.

Chemical Plant or similar experience would be very beneficial for this position. All design will be done using AutoCAD.

Interviews can take place this week for the role and an immediate start is also possible. If you wish to be considered for this position then please send in an up to date CV ASAP.



Regards,

Alex

Recruiter

Support Services Group (1)

Salary

From £25,000 to £30,000 per year + overtime & benefits

Location

Stockport

Job term

Permanent

Job hours

Full time

An established building services design consultancy is looking to expand its busy south Manchester office with the addition of a Thermal Modeller with extensive TAS (Thermal Analysis Software) experience. The successful applicant will work within an established team to take an active involvement in a variety of refurbishment, modernisation and new build projects. You will be involved in building services projects across a number of sectors including educational, leisure, and commercial. Responsibilities will include carrying out dynamic thermal modelling & simulation work, renewable energy assessments, assisting in BREEAM assessments & contributing to general project delivery and the promotion of technical excellence within the location. You will have demonstrable experience in thermal modelling gained with Consultants or within Academia, be fully competent in the use of relevant engineering TAS software have excellent communication & presentation skills and be familiar with relevant legislation (Building Regulations, Part L etc). Excellent CPD scheme offering good potential for further career progression within this busy location. Package includes competitive basic salary, overtime and additional benefits.

Recruiter

Technical Kudos

Salary

From £25,000 to £30,000 per year

Location

Knutsford

Job term

Permanent

Job hours

Full time

Oliver Valvetek Ltd are a leading manufacturer for the oil, gas and petrochemical industry. As a market leader in this highly competitive industry, we operate at a very fast pace and therefore always looking to recruit the best people. We are now looking for a Welding Inspector to join the team at our head office based in Knutsford, Cheshire.

The Role

The QA Weld Inspector will be responsible for ensuring the effective implementation of the quality management system and participation in manufacturing process and system improvements. You will also be supporting the quality activities.

Your responsibilities will include:

· Investigating instances of product and process failure and conduct effect root cause analysis.
· Conducting continual improvement activities to enhance the quality system and improve product quality.
· Developing and delivering training to build quality awareness within the manufacturing teams.
· Interfacing with Engineering and Operations to ensure the transfer to production of new products is in accordance with the desired specifications.
· Conducting internal quality management system audits.
· Supporting the Supplier Development Engineer with the management of the supply chain.
· Compiling monthly QA reports and KPI’s.
· Reviewing new orders for welding requirements.
· Maintaining Excel spreadhseets for supplier rejection, corrective action reporting and customer returns data.

The Candidate

In order to be successful in this role, you will need excellent communication skills, both written and oral, with a passion and responsibility for the customer. You will also need to be willing to travel to customers and suppliers as and when required.

Successful candidates should have:

· Minimum ONC In Engineering
· 5 Years prior experience in Quality Assurance in an engineered product manufacturer.
· CSWIP - Visual Welding Inspecor Level 1 - minimum requirement.
· Experience in quality management systems and quality system audits.
· Experience in using a range of measuring and inspection equipment
· Experience of welding and NDE techniques.

Keywords: welding, weld, inspector, quality, assurance, engineering, engineer, manufacturer, manufacturing

Job Title: QA Weld Inspector
Job Location: Knutsford
Salary: £Competitive



No terminology in the advert you have seen is intended to discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we will gladly accept applications from all sections of the community. You should receive a form of response within 28 days of applying. By applying for a vacancy through Kudos People Ltd you will automatically be allocated with a unique username and password to our award winning recruitment company. To take full advantage register your details in full and access thousands of vacancies. Should you not wish to complete your registration please email [contact details removed]

Recruiter

Hays TCE Jobs

Salary

Competitive

Location

Crewe

Job term

Permanent

Job hours

Full time

The Development Manager is a first line management position and will be responsible for the planning, direction and coordination of the Development / Engineering activities. The role includes managing the engineering design, product development and application engineering teams in an efficient manner, and in accordance with the company’s objectives.

The Development Manager is also expected to be the driving force in the development of the Company engineering strategy and a contributor to the overall company business planning. They take an overview of activity and ensure that everyone in the team is trained, motivated and willing/able to perform to the highest standards. They keep their operation under constant review and suggest/implement improvements for the benefit of the customer.

The Manager must maintain knowledge about the strategy, products and aims of the Company. They ensure that high quality service is provided to both customers and company staff by undertaking effective planning, performance monitoring, training and development, and are instrumental in creating a sense of team commitment.

The role-holder will take a highly visible leadership role in ensuring that the standard of internal and external customer service provided is exemplary. The post holder may be called upon to manage any part of the operation and at times, they may be the most senior manager available in the Company.

Main Tasks

Develop and implement clear Company Development / Engineering strategy in line with the business plan. Monitor actions and performance against the set targets and ensure the necessary corrective action.

Take responsibility for performance, conduct, welfare and discipline issues in line with company procedures. Providing clear direction on what is required of the team, encouraging staff to contribute ideas and suggestions, taking action where possible and providing feedback on issues raised.

Develop, maintain and implement comprehensive standard operating procedures for the Development Department in line with Company QA system, ensuring they are constantly reviewed and updated to reflect the needs of the team and the principles of continuous improvement and to ensure the highest standards of customer service are always achieved and are consistent. Undertake training sessions as required, and in conjunction with, other Managers.

Assess and arrange training, coaching and guidance provided to the engineering team through a combination of structured training, on-the-job training, and personal example and coaching.

Qualifications / Experience
· HND / HNC Engineering
· Project Management Qualification (Desirable)
· Leadership experience
· Experience of working within a manufacturing environment
· Knowledge of vacuum and overpressure applications.

Key Measurements

· Product design cost reduction.
· On-time product issue to market.
· On-time reply to development requests.
· On-time completion of feasibility studies.
· Completion of a portfolio of technical documentation to programme.

Core Competencies

· Customer Orientation
· Technical Understanding Including Products and Markets
· Delivering Business Results.
· Continuous Improvement, operational Efficiency
· 5s and Lean
· Developing the strategy.
· Leading others.
· Self-motivation and team working..
· Planning and control.
Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Recruiter

Technical Kudos

Salary

From £20,000 to £22,000 per year

Location

Knutsford

Job term

Permanent

Job hours

Full time

Oliver Valves Ltd is a leading manufacturer for the oil, gas and petrochemical industry. As a market leader in this highly competitive industry, we operate at a very fast pace and therefore always looking to recruit the best people.

The Role

This role is based at our Head Office in Knutsford. Reporting directly to the Engineering Manager, you will have an engineering background, and be familiar with a manufacturing environment. Your primary responsibilities will be the production of machine and GA drawings and BOM generation. This position may also suit Graduates who are looking for their first role in design.

The Candidate

In order to be successful in this role, you should have the ability to be proactive and use your initiative, also with keen attention to details and high levels of accuracy. You would need the ability to take ownership of projects and be able to deliver to completion, within the agreed timescales. Possessing good influencing skills and a clear analytical approach, would be advantageous.

Successful candidates should have:

· Minimum NVQ Level 3 or equivalent in engineering discipline
· A minimum of 3 years experience within a similar role
· A working knowledge of AutoCad is essential
· Prior experience of solidworks is desirable
· Knowledge of pressure systems or valves would be a distinct advantage

Keywords: CAD, draughtsman, design, engineering, manufacturing, drawings, autocad,

Job Title: CAD Draughtsman
Job Location: Knutsford
Salary: £Competitive



No terminology in the advert you have seen is intended to discriminate on the grounds of age, gender, race, colour, religion, disability or sexual orientation, and we will gladly accept applications from all sections of the community. You should receive a form of response within 28 days of applying. By applying for a vacancy through Kudos People Ltd you will automatically be allocated with a unique username and password to our award winning recruitment company. To take full advantage register your details in full and access thousands of vacancies. Should you not wish to complete your registration please email [contact details removed]

Recruiter

Ecruitaid.com Ltd

Salary

From £32,000 to £37,000 per year + + Benefits

Location

Bollington and Disley

Job term

Permanent

Job hours

Full time

Health, Safety & Environmental Officer
c£35,000 p.a. + benefits
Based Bollington, Cheshire

Tullis Russell is a unique, employee owned, values driven, paper and coatings organisation, established for over 200 years. The Bollington site, which employs c100 people, is a specialist coatings business providing material for security and tamper evidence applications.

Already with an excellent Health & Safety record, the company is looking to recruit a Health, Safety & Environmental Officer who is committed to continuous improvement and who will play a key role in continuing to develop the company’s health & safety culture and behaviours.

Acting as a champion, advisor and guide on all health, safety and environmental matters, and reporting to the Operations & Supply Chain Director, main duties will include:

• Provision of practical health and safety guidance across the site ensuring compliance with legislative and regulatory requirements.
• Development of health, safety & environmental policies and procedures.
• Facilitating consistent adherence to standard operating procedures and industry best practice.
• Provision and delivery of appropriate training packages for all levels of employees.
• Involvement in the delivery, and maintenance of, OHSAS 18001.
• Management of information, reporting and investigation.
• Development of strong, influential, working relationships with all site employees.
• Business risk management.

Candidates should be NEBOSH, and ideally IOSH qualified, with experience in a Health, Safety & Environmental role, gained in a manufacturing/engineering or industrial environment. Approachable, a team player and with strong communication skills, candidates should be committed to behaviorally based health and safety training and conversant with relevant statistical analysis and problem solving techniques.

All applications and contact from third parties must be made via our retained Consultants – McCourt Newton. To apply please forward your CV to [contact details removed] quoting ref 03516.

Applicants must hold a working visa for the UK If you have not been invited for interview within 7 days of the closing date, please assume that your application has been unsuccessful on this occasion.

Closing date: 20th May 2013.