Engineering jobs related to the Civil industry, specifically in the Hampshire area. The engineering vacancies currently available on The Career Engineer are listed below. If you would like to search the site including using more specific keywords please use the search on The Career Engineer Home Page.
We are working with an international company to recruit an exceptional Maintenance Manager to provide World Class management and development of site wide maintenance activities across all disciplines.
The successful candidates will be asked to drive reduction in energy costs and usage as well as ensuring that all Statutory, Corporate and site standards are adopted within the maintenance strategies, to Build and develop a diverse team with strong leadership and incorporating Operational Excellence as a toolset to deliver a stretching KPI focused planned maintenance service.
To apply you must be able have attained a HNC/HND / Degree in Mechanical or Electrical Engineering with specific experience in:
- IOSH/Nebosh
- Water systems (L8)
- Pressure systems (AP)
- HVAC (Carrier / Holland)
- Refrigeration systems (Traine)
- Steam raising (Hamworthy/Thompson-Cochran)
- Further detailed understanding of the following general principles:
- Fluid mechanics/thermo dynamics
- Working in a regulated environment (statutory inspections/FM/Pharma)
Interested? Please call Inder Rai on 01618682215 or e-mail inder.rai@srg.co.uk
The recruiter has stated that all applicants for this job should be able to prove that they are legally entitled to work in the UK. Carlisle Staffing plc, trading as SRG is an Employment Business/Agency.
We are currently working with an international manufacturer to recruit Engineering Planners for its state of the art facility based on the South Coast.
You will be required to co-ordinate all planned & scheduled engineering activities within the areas of Utilities , Processing & Packaging thus ensuring equipment is maintained to the optimum standard.
The purpose of the role is to provide total support to the area maintenance team.
To apply for the role you must be able to demonstrate excellent knowledge of maintenance requirements for Packaging and Production equipment, experience of PC's, word processing, spreadsheets, mainframe database and systems.
Interested? Please send your CV to inder.rai@srg.co.uk or call Inder Rai on 0161 8682215
The recruiter has stated that all applicants for this job should be able to prove that they are legally entitled to work in the UK. Carlisle Staffing plc, trading as SRG is an Employment Business/Agency.
Field Service Engineer required to cover Surrey / Reading and surrounding areas .
Candidates must be experienced within a Field Service Engineering role, proven background in electrical white goods
Other experience of gas or refrigeration would also be advantageous.
My client will be paying upto £22000 + overtime + van + training + pension.
Please apply in writing with CV to nicola.foxall@concept-it.com.
An excellent opportunity has arisen for experienced CAD Draughters in Portsmouth, South of England. Successful candidates will have a shipbuilding or heavy engineering background having served a recognised apprenticeship or other suitable training.
Candidates must be capable of working in a multi disciplined project environment to tight timescales and with limited supervision.
Candidates should be proficient in the use of Computer Aided Draughting Equipment and have the ability to operate in 3D mode.
Candidates will be trained in the use of Tribon.
To apply for this position, candidates must be eligible to live and work in the UK
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail. If you’ve not heard within 5 working days please consider your application unsuccessful on this occasion.
Cheryl Davidson, Technology Project Services, 0131 331 3030, www.tps.co.uk
An excellent opportunity has arisen for a Senior Mechanical Design Engineer in Fareham, South of England. The successful applicant will have proven experience in a similar role, Electro-Mechanical Design, and will have prime responsibility for
To prepare design layouts/feasibility studies and detailed drawing packages for avionic instruments.
1. To work in conjunction with engineers and production teams to bring tasks/projects to completion within stipulated time and cost limits.
2. Manage and perform activities to ensure product designs incorporate appropriate trade-off analysis in order to drive a design.
3. Compile design layouts and investigate individual aspects of design for presentation at project and design review meetings.
4. To prepare full technical data packages including FEA Thermal, Vibration, and Stress analysis and calculations.
5. To produce full manufacturing drawing/documentation sets tacking into consideration DFA, DFP, and DFT techniques and effect all required dimensional and tolerancing calculations.
6. To ensure drawing and documentation changes and execute as necessary.
7. To provide technical assistance to all departments in respect of design, manufacture and quality issues.
8. To liaise with other departments, customers, suppliers, consultants and authorities as required.
9. Assist the engineering manager in the formulation of mechanical design strategy and continual process improvement, in support of the company business and strategic objectives.
To apply for this position, candidates must be eligible to live and work in the UK
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail. If you’ve not heard within 5 working days please consider your application unsuccessful on this occasion.
Cheryl Davidson, Technology Project Services, 0131 331 3030, www.tps.co.uk
An excellent permanent opportunity has arisen for a Production Planning Engineer in Portsmouth, South of England. The Mechanical Engineer will work within the Production Planning Department of Engineering and Ship Support.
The successful applicant will have proven experience in a similar role and will have prime responsibility for creating work break down and zone structures. Principle accountabilities will also include:
- To identify the work by worklist / paragraph that needs to be planned.
- Apply Production Planning methodology to group discreet elements of work.
- Establish and maintain close liaison with satellite centres, sub contractors and production line managers and other elements of PPMC in order to agree structure.
- Carry out evaluation of WBS as part of the continuous improvement process.
- Identify work specification issues for resolution and supply feedback on technical issues.
- Active participation in the evaluation process to improve structures for future projects.
Candidates will have served a recognised apprenticeship within a marine / ship repair organisation and have in depth knowledge of production installation / repair structures and processes. Having a proven track record in refit / installation / repair at either Fitter or Team Manager level. It is essential that to have good knowledge of RN platforms and systems.
Candidates should have the capability to interface with other departments and production teams on a technical level and will also be IT literate with the ability to implement new processes.
To apply for this position, candidates must be eligible to live and work in the UK
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail. If you’ve not heard within 5 working days please consider your application unsuccessful on this occasion.
Cheryl Davidson, Technology Project Services, 0131 331 3030, www.tps.co.uk
We have immediate requirements for marine draughtsman/drafters for long term contract positions in Portsmouth, South England, for this large client.
You will already be a confident user of AutoCAD (preferably 3D) within Shipbuilding, in at least one of the following CAD systems; CADDS4 X, CADDS5, AutoCAD or Tribon. The roles will involve work on various newbuild projects. Ideal applicants will have Tribon experience however training will be given to strong candidates who do not use this system.
We are looking for marine draughters in the following areas:
PIPING DRAUGHTSMEN/DRAFTERS.
OUTFIT DRAUGHTSMEN/DRAUGHTERS.
SEATING/HOTWORK DRAUGHTSMEN/DRAUGHTERS.
Only UK nationals will be considered for these roles due to matters of national security.
To apply for this position, candidates must be eligible to live and work in the UK
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail. If you’ve not heard within 5 working days please consider your application unsuccessful on this occasion.
Cheryl Davidson, Technology Project Services, 0131 331 3030, www.tps.co.uk
An excellent opportunity has arisen for an Electrical Designer in Portsmouth, South of England. The successful applicant will have proven experience in a similar marine/naval role reporting to the Chief Electrical Designer.
Duties will include analysis, definition and preparation of technical specifications for:
Power generation and distribution systems
Power conversion machinery
Platform management systems
Lighting systems
Detection systems
Lightning protection
Degaussing systems
Flight deck and hangar electrical services
Cathodic protection
Required to cross all disciplines of engineering but particular experience and competence in the Electrical / Hull Outfit area is required. Ideally educated to degree or HND standard and have achieved, or be applying for membership of IEE. Benefits include a 4 day week and pension scheme.
To apply for this position, candidates must be eligible to live and work in the UK
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail. If you’ve not heard within 5 working days please consider your application unsuccessful on this occasion.
Cheryl Davidson, Technology Project Services, 0131 331 3030, www.tps.co.uk
An excellent opportunity has arisen for a Senior/Principal Electrical Designer in Portsmouth, South of England. The successful applicant will have proven experience in a similar marine/naval role reporting to the Chief Electrical Designer.
Duties will include analysis, definition and preparation of technical specifications for:
Power generation and distribution systems
Power conversion machinery
Platform management systems
Lighting systems
Detection systems
Lightning protection
Degaussing systems
Flight deck and hangar electrical services
Cathodic protection
Required to cross all disciplines of engineering but particular expertise in the Electrical / Hull Outfit area is required. Ideally educated to degree or HND standard and have achieved, or be applying for membership of IEE. Benefits include a 4 day week and pension scheme.
To apply for this position, candidates must be eligible to live and work in the UK
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail. If you’ve not heard within 5 working days please consider your application unsuccessful on this occasion.
Cheryl Davidson, Technology Project Services, 0131 331 3030, www.tps.co.uk
PLANT ENGINEER
SYNTHETIC RUBBER MANUFACTURER
SOUTHAMPTON
A Plant Engineer is now required at this synthetic rubber manufacturer for its Hythe plant, based near Southampton. The successful candidate will be responsible for the mechanical maintenance and reliability of the finishing area. As Plant Engineer you will be responsible for mechanical reliability and maintenance of plant in designated area; the development and implementation of preventive maintenance strategies and also for the co-ordination with other disciplines involved electrical, instrument, scaffolding etc.
Your specific responsibilities will include planning and organisation of maintenance activities ensuring safe systems of work; failure analysis and preparation of technical specifications for repairs and improvements. You will undertake technical supervision of maintenance work and make efficient use of maintenance resources – respecting budgets and timescales. You will work order control within the Computerised Maintenance Management System (SAP) and also undertake plant inspection (mechanical machinery, pressure systems, lifting equipment etc). The Plant Engineer will work within the broad direction provided by the Mechanical Engineer. In this role you will work in accordance with Company procedures, Works Instructions, Business targets etc.
Successful candidates will be ONC qualified or equivalent in Mechanical engineering with maintenance experience in a process or similar industrial environment. You will be able to analyse failures and implement short and long term solutions to technical problems. You will also need hands on experience and knowledge of mechanical machinery e.g. presses, conveyors, pumps and gearboxes.
Engineer and Senior Engineer level staff required (2 + years exp) for busy discipline office providing pavement and material solutions to highways, ports and airports.
Civil Design Engineers with experience in the design and assessment of ports and marina's worldwide. Engineer level to Principal level required for this well established and profitable team. Overseas travel will be expected as will at least 2 years experience in the design of modern ports and terminals.
SOFTWARE/TEST SOFTWARE PROFESSIONALS
SPACE SYSTEMS TECHNOLOGY
BASED PORTSMOUTH/STEVENAGE
Excellent opportunities now exist for Stress and Structures Engineers to join this leading, state of the art technology company which is a global leader in the design and manufacture of satellite systems. They are now seeking a number of Software/Test Software Professionals to be based at their sites in Portsmouth and Stevenage.
POWER/ELECTRICAL/EMC SYSTEMS ENGINEERS
SPACE SYSTEMS TECHNOLOGY
BASED PORTSMOUTH/STEVENAGE
Excellent opportunities now exist for Power/Electrical/EMC Systems Engineers to join this leading, state of the art technology company which is a global leader in the design and manufacture of satellite systems. They are now seeking a number of Engineers to be based at their sites in Portsmouth and Stevenage.
Excellent opportunities now exist for Integration, Payload, Hardware and Engineering Managers to join this leading, state of the art technology company which is a global leader in the design and manufacture of satellite systems. They are now seeking a number of Engineering and Technical Managers to be based at their sites in Stevenage and Portsmouth:
Integration Manager
You will be responsible for a Mechanical and Electromechanical team of up to 25 staff to provide facilities, equipment and manpower to enable mechanical assembly and electrical integration operational phases of projects. HND/Degree qualified, you will possess proven experience within an assembly or production environment.
Payload Manager
With a sound technical background and a proven ability to interface with customers you will take responsibility for a telecommunications payload. You will lead the payload team, co-ordinate programme activities, take leadership of payload proposals and provide the customer interface. You should possess a demonstrable background in the space, aerospace or defence sectors with proven project or engineering management capabilities.
Hardware Section Leader
Your role will involve leading a team of skilled Design Engineers carrying out design of complex digital and analogue electronics for a range of satellite equipment. You should possess knowledge and experience of digital circuit design including combinational, sequential, algorithmic, synchronous and asynchronous circuits. FPGA/VHDL experience and design for manufacture and test is also beneficial.
Engineering Manager
Working within a world class Antenna group, your role will be to manage the group engineering resource to ensure that the workload requirements across projects, proposals, R&D and process improvements is satisfied. Degree qualified in an engineering discipline you will have significant design experience in antenna systems and equipment ideally for the space environment.
MES/MIS
APPLICATIONS ENGINEERS
LEADING INFORMATION SYSTEMS PROVIDER
PROCESS INDUSTRIES
SOUTH COAST
Are you seeking direct customer contact as an Application Specialist, working as part of a Professional Services team on innovative leading edge projects in the Oil and Gas industry? Wishing to learn all about new innovative software products?
Keen to join the start-up branch of an overseas owned, established company?
Now's your chance! In this exciting role as Applications Engineer you will grow your analytical skills and be trained to become a specialist in a highly sought after software package (using the latest WEB, .Net and SOA architectures).
Our client is looking to recruit people with good customer facing skills to gather and analyse their requirements, put together a solution, draw up specifications, and assist with the configuration of their leading software products. The role entails designing solutions to meet customer needs based on their products.
Candidates will require the following experience:
•Have performed software requirements gathering/analysis in a customer-facing role.
•Understand modern IT, SOA, Database, .NET, communication technology, and security issues.
•Have good database skills (writing SQL statements, etc.)
Candidates should have the following attributes: Great interpersonal, verbal, and written skills; enthusiasm to learn; analytical mind; methodical personality and really enjoy their work.
It would also be advantageous to have experience /knowledge of the oil and gas industry, or process industries. Experience using Oracle or SQL Server databases; configuring Windows IIS applications (creation, modification, security setup) and programming and or Web knowledge (HTML, JavaScript, XML, C#) would also be desirable for this role.
These positions offer the potential to travel both in the UK and overseas. These are permanent positions.
Overall Purpose/Objectives of Role
1. The design, modification, commissioning, verification and proving of electronic circuits – digital and analogue.
2. The preparation of documentation to enable the certification/approval of products in accordance with programme-specific requirements.
Key duties:
1. To design, commission and verify analogue and digital circuits in accordance with defined requirements specifications.
2. To undertake hardware qualification activities or through sub-contractors, to ensure implementation of appropriate qualification activities.
3. To ensure designs are documented to the relevant project/Company standards.
4. To specify, design, commission and verify special to type test equipment.
5. To take responsibility for completing hardware engineering activities to cost and schedule.
6. To liaise with other departments and functional groups as necessary.
7. To liaise with sub-contractors as necessary.
Job-Related Experience
Essential
First hand hardware design skills. This should include experience of the complete design life cycle from interpretation of a requirements specification through design, development, debugging and documentation to design proving and certification.
Experience of designing microprocessor circuitry
Experience of designing analogue circuitry (eg amplifiers, filters and signal sampling)
Experience of logic design (including use of logic arrays eg VHDL or DSP) and schematic capture techniques
Knowledge of hardware qualification practices and procedures.
Experience of keeping documentation under formal configuration control
Experience of preparing board and unit level test specifications
Desirable
Familiarity with 68000 series microprocessor architecture and applications
Familiarity with TI TMS320 series DSP architecture and applications
Familiarity with VHDL and programmable logic development tools such as ModelSim and Leonardo Spectrum
Awareness and appreciation of RTCA/DO-254
Overall Purpose/Objectives of Role
1. The design management and design, modification, commissioning, verification and proving of electronic circuits.
2. The preparation of documentation to enable the certification/approval of products in accordance with programme-specific requirements.
Key duties:
1. To generate hardware requirements documents from higher level requirements.
2. To design analogue and digital circuits in accordance with defined requirements specifications.
3. To plan and manage hardware qualification activities.
4. To ensure designs are documented to the relevant project/Company standards.
5. To specify equipment test requirements.
6. To take responsibility for completing hardware engineering activities to cost and schedule.
7. To liaise with other departments and functional groups as necessary.
Job-Related Experience:
Essential:
First hand hardware design skills. This should include experience of the complete design life cycle from interpretation of a requirements specification through design, development, debugging and documentation to design proving and certification.
Experience of designing microprocessor circuitry
Experience of designing analogue circuitry (eg amplifiers, filters and signal sampling)
Experience of logic design (including use of logic arrays eg VHDL or DSP) and schematic capture techniques
Knowledge of hardware qualification practices and procedures.
Experience of keeping documentation under formal configuration control
Experience of preparing board and unit level test specifications
Desirable:
Understanding of data acquisition concepts.
Familiarity with 68000 series microprocessor architecture and applications
Familiarity with TI TMS320 series DSP architecture and applications
Use of VHDL and programmable logic development tools such as ModelSim and Leonardo Spectrum
Awareness and appreciation of RTCA/DO-254
Awareness and appreciation of RTCA/DO-160 or equivalent
This key role is responsible for ensuring that production planning is consistent with customer requirements. The job holder will be required to plan, monitor and control the production activities of Cable Accessories to ensure that customer needs are met, consistent with the efficient operation of the factory and the optimisation of the capital employed. Specific responsibilities will include:-
Ensuring that all products are routed and costed correctly;
Controlling the WIP inventory and making priority decisions as appropriate;
Producing weekly cell schedules to ensure that sales and manufacturing targets are achieved;
Acting as the key interface between Logistics and Manufacturing functions to ensure effective communication of priorities and changes;
Placing orders on subcontractors when required;
Identifying improvement opportunities and methods to achieve;
The successful candidate will be qualified, as a minimum, to HNC standard or equivalent. Experience of cellular or machine shop manufacture utilising modern inventory control techniques would be beneficial but not essential as full training will be provided.
Working under pressure, you will be able to demonstrate excellent communication and inter-personal skills together with a "team player" approach. This role will also require a high degree of self-motivation and organisational ability.
Candidates must be capable of analysing complex production schedule situations to ensure effective optimisation of all manufacturing constraints. An excellent working knowledge of Microsoft Office will be essential, with SAP a desirable.
Person Specification
Skills and Abilities
Verbal Communication:
Internal (to various internal depts – eg shop floor, commercial, engineering)
External (Customers, Suppliers, subcontractors etc.)
Written Communication:
Computer literacy: Word processing
Excel Spreadsheets
Access Microsoft Office
PowerPoint
Outlook
SAP Database
Intranet and Internet
Key skills & experience: Proven experience in a similar role
Vacancy Description Main Duties and Responsibilities Include:
The management and scheduling of Design Intent Reviews of the scope of work during the Stage 2 Engineering Phase and be point of contact with Stage 1 Design Dedicated Design Authority representatives.
Company point of contact for co ordination of client representation at Design Intent Reviews associated with build section,
Interface with Operations team to ensure that are appropriately represented at the Design Intent Reviews.
Responsibility for the co-ordination and conformity of drawings and documentation that is presented at Engineering reviews including:
Stage 2 Production Engineering to Stage 3 Production Engineering Output Transition
Stage 3 Production Output Transition to Stage 4 Production.
Responsibility for the recording of the status and approvals associated with the information received from partners and presented by the company.
Role Requirements:
Experience of working within a multi disciplined engineering drawing office environment.
Experience of working on Naval Engineering projects.
Occasional travel within the UK to Alliance partner sites.
The Successful Candidate will:
Have good IT skills including MS Office.
Be organised and methodical in their working.
Have an approachable and flexible attitude when dealing internal and external customers.
To apply for this position, candidates must be eligible to live and work in the UK
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail.
Steven A Bray MREC CertRP
Recruitment Consultant
Tel: +44 (0)131 331 3030
Fax: +44 (0)131 3312518
e-mail: Steven.Bray@tps.co.uk
PURPOSE Design, planning, implementation and commissioning of monitoring and control systems for multi-media broadcast services over terrestrial television / radio, satellite systems and distribution networks.
Definite accountabilities/responsibilities
Provide specialist technical support to the telemetry workstream of the Digital Switchover Programme in the delivery of GUI based telemetry solutions for broadcast projects.
Ownership of specific aspects the design, build/configuration and test of the telemetry front-end being delivered by the Operational Support System project.
Assist with troubleshooting major design and build issues as they arise.
Produce supporting design/operational documentation for handover to the customer and internal operations departments.
Contribute to the design authority sign off and co-ordination process, with input into the production of cost effective telemetry system design solutions, ensure solutions are provided on time, in budget and delivered to the internal customer satisfaction.
Contribute to appraisal of leading edge technologies to provide innovative telemetry solutions, and system level design, whilst understanding telemetry requirements of existing broadcast technologies and systems.
Takes a responsibility for ensuring compliance with Health and Safety regulations in own working environment.
Willing to undertake continuous personal development to meet the technical requirements of future projects.
Potential accountabilities/responsibilities
Within the specific area of telemetry GUI development manage 3rd parties during development, installation and integration project phases.
Set tasks for and supervise more junior staff.
Regular liaison with internal and external operational groups, regarding long term persistent faults / design issues etc. Provide 2nd & 3rd line maintenance and operations support.
Contribute towards defining appropriate group processes and procedures.
Required Skills
experience or pr
Key skills & experience: Aerospace/Defenhce industry background, and technical qualifications in aerospace engineering to electrical/electronic
Vacancy Description
To, individually or as part of a team, identify, pursue and close sales opportunities in accordance with the agreed business strategy for allocated customers or regions or specific enquiries.
To maintain relationships with Customers and external agencies within an agreed overall sector of responsibility in order to develop/identify new/further opportunities that fall within the Company’s capability and in line with the Company’s strategy.
For allocated opportunities to:
• Secure approval from the Company on the price, terms and specification that can be offered
• Prepare (or co-ordinate and lead) the timely submission of information, quotations and proposals to Customers
• Follow up such quotes/proposals in order to secure the contract/purchase order
From time to time to represent and promote the client at trade shows
To maintain adequate records of all customer contacts, communications and reports.
To provide reports on the status of sales and activities as required
To support the Sales Manager/Director in preparing budgets, estimates etc.
To contribute to any changes as may be required to the formulation of revised business plans and strategies.
To undertake such travel as may be required in order to execure the above duties
Qualifications and Experience
Essential:
HNC or equivalent in electrical, electronic or other branch of aerospace engineering
At least 5 years experience in a position requiring extensive customer interaction (e.g. Sales, Programme Management, Customer/Field Support, Contracts, senior engineer) in an Aerospace or Defence industry environment
or equivalent depth of experience in a responsible position as an end user of avionic or similar equipment in a commercial or defence aerospace environment
Desirable
Degree in electrical, electronic or aerospace engineering
3 or more years experience in a sales role in a competitive Aerospace or Defence environment
Experience of the development life cycle for avionics equipments, including those containing embedded software
General aviation knowledge/awareness
Business and financial competence
Essential:
Understanding/experience of working in both engineering and manufacturing environments
Familiarity with principles and issues surrounding contract terms and conditions
Comfortable deali
Overall Purpose/Objectives of Role
To assemble and test a product by following written/pictorial build procedures
Key duties:
1. To build assemblies in accordance with appropriate procedures
2. To carry out rework and modifications in accordance with relevant IPC standards
3. To compile test reports and other relevant documentation
4. To conduct basic test routines at sub-assembly and GA levels
5. To carry out finishing operations prior to shipment to customer
6. To maintain input to business information systems as appropriate
Competency area
Essential
Job Related Experience
Able to follow written procedures to test a product at general assembly and sub-assembly levels
Sound knowledge of electro-mechanical practices, gained from hands-on experience
Able to read and interpret technical data (drawings and technical publications)
Experience of SMT manufacturing, able to identify different component types, values and correct orientation.
Personal Skills
Good level of manual dexterity
Computer literate
Good team player
Good communication skills (written & verbal)
Methodical and analytical approach to work
Safety orientated
Desirable
Familiar with Excel and Word
Qualifications and Experience
Knowledge and experience gained from a minimum of two years in a similar production role
A valid IPC accreditation
Other
Prepared to work additional hours as required to meet business needs
Flexible in respect of hours of work
Able to distinguish between colours Current driving licence
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail.
Steven A Bray MREC CertRP
Recruitment Consultant
Tel: +44 (0)131 331 3030
Fax: +44 (0)131 331 2518
e-mail: Steven.Bray@tps.co.uk
Key skills & experience: Proven experience in a similar role.
Reporting to the Production Planning Manager, the successful applicant will have prime responsibility for creating work break down and zone structures. Principle accountabilities will also include:
To identify the work by work list / paragraph that needs to be planned.
Apply Production Planning methodology to group discreet elements of work.
Establish and maintain close liaison with satellite centres, sub contractors and production line managers and other elements of PPMC in order to agree structure.
Carry out evaluation of WBS as part of the continuous improvement process
Identify work specification issues for resolution and supply feedback on technical issues.
Active participation in the evaluation process to improve structures for future projects.
Candidates will have served a recognised apprenticeship within a marine / ship repair organisation and have in depth knowledge of production installation / repair structures and processes. You will have a proven track record in refit / installation / repair at either Fitter or Team Manager level. It is essential that you have good knowledge of RN platforms and systems.
You should have the capability to interface with other departments and production teams on a technical level and you will also be IT literate with the ability to implement new processes.
To apply for this position, candidates must be eligible to live and work in the UK
Please send a copy of your current CV and I will be in contact shortly to discuss in more detail.
Steven A Bray MREC CertRP
Recruitment Consultant
Tel: +44 (0)131 331 3030
Fax: +44 (0)131 3312518
e-mail: Steven.Bray@tps.co.uk
Key skills & experience: Previous experience
We are looking for an Inspector to work for an Aerospace company based in Fareham.
Your main responsibilities will include:
Inspect electrical/electronic/mechanical components, sub assemblies and assemblies against current issue drawings and parts lists
Carry out functional testing of sub-assemblies and final instruments
Assist the quality assurance function in completion of First Article Inspection requirements and defect investigation and analysis
Issue internal release documentation and act as a CAA-designated signatory for external release documents as required
Correctly check WIP where required
Support Engineering department with inspection of prototype boards and sub assemblies and witness the testing of completed engineering units as required
You must have the following skills:
Experience of working within an electronic environment
Experience of final good release, components, sub assemblies and general assemblies
Knowledge of IPC-A-610 or equivalent standards
Ability to read drawings and interpret specifications
Computer literate with operational skills of e-mail, word processing and spreadsheet packages
You must of had previous experience in working as an Inspector within an Electronic environment. It is desired to be from an Aerospace industry.
Key duties:
1. To inspect electrical/electronic/mechanical components, sub-assemblies and assemblies against current issue drawings and parts lists.
2. To carry out functional testing of sub-assemblies and final instruments.
3. To assist the quality assurance function in completion of First Article Inspection requirements and defect investigation and analysis.
4. To issue internal release documentation and act as a CAA-designated signatory for external release documents as required.
5. To correctly track WIP where required.
6. To support Engineering Department with inspection of prototype boards and sub-assemblies and witness the testing of
Vacancy Description Based in the Hydraulic department you will be involved in the refit of components and assembly of systems related to high-pressure air and hydraulics systems on board RN and commercial vessels. You will need experience of working on large-scale HP air and hydraulic systems, preferably within a marine environment.
The department work on these systems both afloat and within the Hydraulic workshop.
You will be capable of working with live HP systems (up to 4000 psi), working with various hydraulic couplings (including swagelock).
You will have awareness of hydraulic cleanliness procedures, general Marine fitting skills, experience of working with pipe systems and associated equipment and have previous use of flushing equipment (experience an advantage not essential).
You must be a time served tradesman or equivalent, and your indentures/trades papers will be required to be shown as proof upon the first day of employment.
Due to matters of national security, you must be in a position to obtain UK security clearance