AUTOMOTIVE ELECTRONIC SYSTEMS & SUPPLIER DEVELOPMENT WARWICKSHIRE COVENTRY,WARWICK AUTOMOTIVE

AUTOMOTIVE ELECTRONIC SYSTEMS & SUPPLIER DEVELOPMENT

Description

AUTOMOTIVE / VEHICLE ELECTRONIC SYSTEMS & SUPPLIER DEVELOPMENT

16400Telephone, Infotainment and Telematic Engineer

16436 ECU Hardware and Software and CAN

1431037Electrical Systems Engineer navigation systems

3741039Electrical Systems Engineer general

9921040Software Engineer general

1061041Development Engineer Powertrain control

7701063Power Supply Systems Engineer
5711072Electrical Systems Engineer infotainment systems
8541076Electrical Immobiliser and electronic steering column lock Project Engineer

16400Telephone, Infotainment and Telematic Engineer
LocationDual Sites Coventry and Warwick
Duration40 weeks

CONTRACT POSITION Guide price for this position £29.14 hour (Freelance or LTD Co Status) 2 week pay cycle.

Position Description:
This role has the responsibility for the Telephone and telematics system on all company products. As the owner of this customer facing system you will be responsible for : Validation of design for the system including testing systems in several languages (prior knowledge of these languages is not required), validating the customer interface and interface to the MOST / CAN vehicle network. Champion the creation and update of Functional Area Descriptions, System Requirement Documents and Software Requirement Specifications for the introduction of all features. Creation and delivery of Design verification plans. Coordinate the resolution of AIMs / e-Trackers / Issues to achieve targeted glidepath to closure. Champion analysis and resolution of electrical PD issues impacting Business performance - approved phone lists. Use of problem solving tools as appropriate e.g. G8d, 6 Panel. This role will also be involved in the future HMI development to maximize commonality between all models using the platform development.

Skills Required:
Knowledge of MOST/CAN based infotainment systems - essential. Experience of human interface (HMI) design - essential. Experience of in vehicle control systems - essential. Knowledge of FPDS / GPDS - desirable. Knowledge of PD toolsets (AIMS / WERS / E-tracker) - essential. Capability of working in a pro-active and pressured environment - essential. Knowledge and application of quality and problem solving tools - essential. Ability to interact and communicate at all levels within the business, suppliers and customers- essential.

Skills Preferred:
Full UK driving licence.

Experience Required:
Proven delivery performance - essential. Capability to work individually or as part of a team - essential. Previous PMST leadership behaviours - desirable.

************************************************************************

16436 ECU Hardware and Software and CAN
Location dual site Coventry and Warwick
Duration39 weeks

CONTRACT POSITION Guide price for this position £24.66 hour (Freelance or LTD Co Status) 2 week pay cycle.

Position Description:
Capture customer requirements and feature specifications for vehicle. Develop ECU hardware and software specifications for vehicle and agree delivery plan with supplier. Support vehicle integration via system interaction simulation and testing. Develop CAN message catalogue. Develop System Information Document to support all users of the system incorporating component data and system schematics. Deliver system application to GPDS targets. Develop Design & Validation Plan from above, and ensure system compliance to company standards. Generate system FMEA and support hazard analysis and robustness assessment activities, with supplier.

Skills Required:
Essential skills / experience required: ECU hardware & software specification, knowledge and experience of CAN / bus systems, understanding of input / output circuit design, knowledge and experience of automotive diagnostic systems. Knowledge and experience of system calibration tools is needed. Advantage: knowledge of GPDS delivery principles, experience of EMS supplier base, proven project management skills, previous experience of simulation tools.

Skills Preferred:
A HND or Degree in Mechanical or Automotive Engineering. Good understanding of transmission related component function/design. Excellent communication skills. Strong supplier management skills. Good PC skills including Microsoft Office and MS Project. Have excellent planning skills with 'Proactive' rather than 'Reactive mindset'. Be self driven and motivated to achieve personal and team goals with minimal supervision.

Experience Required:
Full driving license. Proven experience in automotive component delivery.

************************************************************************

166191431037ELECTRICAL SYSTEMS ENGINEER NAVIGATION SYSTEMS
LocationCoventry
Duration32 weeks

CONTRACT POSITION Guide price for this position £26.59 per hour (Freelance or LTD Co Status) 2 week pay cycle.

Division: Advanced Engineering

Position Description:
The successful candidate will work within the Navigation Systems team in Electrical Engineering to deliver the next generation navigation platform & in-cycle enhancements to current navigation platforms, in support of vehicle cycle plan. This will include the following key responsibilities:- Monitoring and completion of project deliverables according to programme requirements & within GPDS framework. Generation of functional requirements and use cases leading to development of technical specifications - hardware & software. Management and liaison with both tier 1 & tier 2 suppliers to ensure projects are delivered on time and to target costs. Liaise closely with VCC, Programme teams, Marketing, Purchasing, Manufacturing Plants, other engineering areas etc. Conduct Design Verification Planning, testing & sign-off activities. Component drawing & BOM release via WERS.

Skills Required:
Good project management & communication skills. Design and development of Electrical & Electronic systems/ Software design. Ability to confidently interact with all levels of management & staff.

Skills Preferred:
Experience in development of automotive Infotainment System products would be beneficial. Knowledge/experience of MOST communications protocol.

Experience Required:
Minimum of five years experience in electrical/electronic system development

Experience Preferred:
The successful candidate shall be a self motivated and enthusiastic individual with sound judgement & discipline. Able to work well within a team environment and be able to manage work tasks to an agreed plan, with minimal supervision. Knowledge/experience of FMC Processes and Procedures - i.e. WERS, eFDVS process. GPDS project management process & milestones would be advantageous

Education Required:
The successful candidate will be educated to Degree/Masters level in Electrical or Automotive Engineering


166313741039ELECTRICAL SYSTEMS ENGINEER
LocationCoventry
Duration28 weeks

CONTRACT POSITION Guide price for this position £negotiable please quote your required rate to undertake this contract (Freelance or LTD Co Status) 2 week pay cycle.

Division: Electrical Engineering

Position Description:
Design, Development and verification of Electrical Engineering systems. Working with Engineers from all disciplines and liaising with Suppliers, Manufacturing, Finance and Programme Management. The activities will include development, process starting with defining system requirements, developing the specification and all the system documentation including FMEA's, Quality History Review, Design Validation plans, Robustness demonstrations, timing plans, release packages, development of diagnostics and carrying out validation plans, supporting vehicle builds etc.. Must also communicate progress, issues etc..

Skills Required:
Knowledge of Automotive processes with problem solving experience. Good communication, presentation and negotiation skills, a good team player. Experience in Design verification activities. Must be technically capable and practical with the ability to understand complex requirements and translate them into clear specifications. Must be motivated and keen to delivery a quality product.

Skills Preferred:
Understanding of electronics hardware design tools and 6 sigma tools would be advantageous.

Experience Required:
Experience of working with suppliers to deliver electronic systems preferably automotive applications. Must be familiar with using Microsoft office tools. 5 years experience of Design and Development.

Experience Preferred:
Experience of using Electrical tools such as Matlab Simulink, Can and Lin bus tools.

Education Required:
Candidates must have a minimum of HNC / HND in electrical, electronics or other applicable fields, ideally educated to degree level.

---------------------------------------------------------------------------------------------

166329921040SOFTWARE ENGINEER
LocationCoventry
Duration28 weeks

CONTRACT POSITION Guide price for this position £negotiable please quote your required rate to undertake this contract (Freelance or LTD Co Status) 2 week pay cycle.

Division: Electrical Engineering

Position Description:
Design, Development and verification of Electrical Engineering systems. Working with Engineers from all disciplines and liaising with Suppliers, Manufacturing, Finance and Programme Management. The activities will include development, process starting with defining system requirements, developing the specification and all the system documentation including FMEA's, Quality History Review, Design Validation plans, Robustness demonstrations, timing plans, release packages, development of diagnostics and carrying out validation plans, supporting vehicle builds etc.. Must also communicate progress and issues etc.. Areas of systems experience required. Diagnostics and control system components (ECU's, Sensors & actuators). vehicle software, calibrations and diagnostic strategies for new model platforms. CAN to MOST gateways.

Skills Required:
Knowledge of Automotive processes with problem solving experience. Good communication, presentation and negotiation skills, a good team player. Experience in Design verification activities. Must be technically capable and practical with the ability to understand complex requirements and translate them into clear specifications. Must be motivated and keen to delivery a quality product. Coordinate the resolution of issues and change management activities. Use of problem solving tools eg. G8D, 6 Panel etc. typical activities include algorithm development for a control system , test plan generation, CAN message definition and system specification. Software test and validation, system de-bugging / reflashing of modules, bench testing to specification using simulation tools and vehicle validation including CET and HET. Must be able to work closely with many cross functional areas to achieve robust system solutions.

Skills Preferred:
Understanding of electronics hardware design tools and 6 sigma tools would be advantageous

Experience Required:
Experience of working with suppliers to deliver electronic systems preferably automotive applications. Must be familiar with using Microsoft office tools. 5 years experience of Design and Development. Software or Control system engineering.

Experience Preferred:
Experience of using Electrical tools such as Matlab Simulink, Can and Lin bus tools.

Education Required:
Candidates must have a minimum of HNC / HND in electrical, electronics or other applicable fields, ideally educated to degree level.

------------------------------------------------------------------

166261061041DEVELOPMENT ENGINEER POWERTRAIN CONTROL
Locationdual site Coventry and Warwick
Duration32 weeks

CONTRACT POSITION Guide price for this position £29.13 per hour (Freelance or LTD Co Status) 2 week pay cycle.

Division: Power/Train

Position Description:
Development Engineer a) Lead the Development Validation on Vehicle and HILST for the TCM, Drive Line and GSM. b) Lead the generation of DV procedures. c) Provide support to resolve issues affecting the vehicle build. d) Support EMC & End of Line Production testing. e) Lead the environmental testing both in the UK and overseas as required. Support vehicle or vehicle rectification & Lead the update of DVP status.

Skills Required:
Main requirements are for powertrain control development experience. With good electronics background, with fault finding capability using diagnostic CAN tools, including scopes, multi-meters, etc....Control Algorithm development, Test Plan generation, CAN message definition/specification, liaison with internal departments, Driver interface (messages/shift lever etc), Hardware problem resolution, Software Test & Validation, System de-bugging/reflashing of modules.

Skills Preferred:
Good communication and presentation skills, good PC/IT skills, flexible, committed, self starter, able to deliver in all circumstances. Fault Tree Analysis,Hazard Analysis, Hardware specification development, integration of JLR hardware, requirements capture and definition,liaison with Manufacturing and Service diagnostic teams.

Experience Required:
Successful delivery of at least 1 previous Powertrain control system and design, development and calibration project to meet whole world requirements for a major OEM or supplier Working knowledge of developing Powertrain control systems that meet customer expectations. Working knowledge on use of INCA, Matlab, Excel, Word, Project and Access. Specific working knowledge of the Powertrain Control System used on the program Proven project time line management

Experience Preferred:
Working knowledge of project delivery process - GPDS & FPDS. Working knowledge of change management processes - AIMS, WERS, PNR/PACN, PMST support Appreciation of vehicle dynamics and drive line mechanics would be an advantage.

Education Required:
Qualified to degree standard or equivalent experience in Electronics, Software or Control System Engineering. Other degree will be considered depending on experience.

*********************************************************************

166787701063POWER SUPPLY SYSTEMS ENGINEER
LOCATIONdual site Coventry and Warwick
DURATION29 weeks

CONTRACT POSITION (Either freelance or LTD Co Status) Guide price for this position £28.38 hour (Freelance or LTD Co Status) 2 week pay cycle.

Division: Electrical Engineering

Position Description:
Power Supply Systems PMST Leader - responsible for delivery of Power Supply Solutions to support all of the required project milestones. Responsible for delivery of Intelligent Power Management System (IPSM) Solutions, appropriate control strategies and supporting commodity solutions - alternators, starter motors, batteries, battery monitoring devices etc. for all vehicles. With the increasing demand for electrical power the team is actively involved in power management systems and new technologies, such as SRC (Smart Regen Charging) and Stop / Start applications.

Skills Required:
Ability to manage a wide range of diverse tasks from all sources (as focal point for project), this includes prioritisation, co-ordination/ tracking, reporting out at all levels in the business. The ability to present clearly and logically, difficult technical concerns to both suppliers and internal senior management. 

Skills preferred:
Well developed organisational and planning skills. Strong communication skills, able to communicate complex technical concepts, data and conclusions to a wide audience. Good team working and communication skills, able to foster good working relationships with customers and suppliers. Ability to negotiate with other functions to achieve objectives. High drive, self motivated and able to deliver results with minimum supervision. Knowledge of the following processes would be beneficial eg. GPDS/WERS/AIMS/EFDVS.

Education required:
Degree or equivalent preferred but not essential.

**********************************************************************

167235711072ELECTRICAL SYSTEMS ENGINEER INFOTAINMENT SYSTEMS
LOCATIONCoventry
DURATION27 weeks

CONTRACT POSITION (Either freelance or LTD Co Status) Guide price for this position £32.14 hour (Freelance or LTD Co Status) 2 week pay cycle.

Division: Advanced Engineering

Position Description:
The candidate will be responsible for all aspects of the electrical package including interfaces, physical package and electronics hardware associated with the introduction of a new module in to the vehicle. The candidate will form part of a team which is responsible overall for the research and development of innovative infotainment solutions from inception to Concept Readiness and onward to Implementation Readiness.

Skills Required:
Good all round engineering capability with good communication and interpersonal skills. Understanding of electrical integration issues including EMC, connector solutions, wiring harnesses and automotive multiplex systems. The ability to apply common sense to the problem at hand.

Skills Preferred:
CAD (Catia V5), FMEA, use of circuit design packages

Experience Required:
Experience of electrical package and connector solutions and wiring harness essential. Some experience of vehicle infotainment system and vehicle electrical and electronic systems engineering would be required.

Experience Preferred:
Experience of working in a research environment and exposure to multiplex networks (MOST/CAN/others)

Education Required:
B Eng or equivalent experience

**********************************************************************

167058541076ELECTRICAL IMMOBILISER AND ELECTRONIC STEERING COLUMN LOCK PROJECT ENGINEER
LocationCoventry
Duration27 weeks

CONTRACT POSITION Guide price for this position £33.54 per hour (Freelance or LTD Co Status) 2 week pay cycle.

Division: Electrical Engineering

Position Description:
Working within the Security and PEPS department analysing and resolving start authorisation and ESCL interaction issues on test rigs and vehicles. Working within a team to develop a fully integrated system that works with a core smart junction box. To lead the cross brand system strategy. Report directly to Security and PEPS manager. Lead the design and development of the system, Lead the validation / verification and resolution activities, support the various build phases and quality fixes.

Skills Required:
Ability to write engineering specifications (SRD, FAD, KFC). Ability to define messages and write software specification (SWRS). Ability to understand test scripts and state flow models. Ability to read circuit diagrams, harness drawings and debug electrical faults. Ability to understand electrical interfaces, Create Design verification methods and plans. Ability to use CAN/ LIN tools would be an advantage. Ability to communicate at all levels (engineers, suppliers) and engage in problem solving tasks.

Experience Required:
Engineering experience. Ideally knowledge of CAN / LIN tools. Some experience in fault finding, testing and writing specifications. Ideally some knowledge of Security or Immobiliser systems.

Education Required:
Candidates must have a minimum of HNC/HND in relevant field, ideally educated to Degree level.

Engineering & Production Management Consultants Ltd